Automated Engine Shutoff & Restart

StopIdle is an anti-idling device designed to stop a vehicle engine when no operation is being performed and no accessories are activated. The module also continuously monitors the battery and the cabin temperature--it can restart the engine if the battery voltage goes below a programmable value or the cabin temperature is outside the acceptable limits.

Finally, a device smart enough to respond to different Idling types!

You can program the device to act differently according to each Idling situation. For example, StopIdle can allow the engine to keep running if the vehicle is idling due to traffic; it can detect other devices like light bars and PTO driveshafts; it can also monitor the cabin temperature, and temporarily run the engine to restore an acceptable temperature limit.

Fleet Managers can now focus on saving dollars by having their vehicles idle only when truly deemed necessary.

Programmable Features

• Minimum acceptable idling time & idling exceptions
• Idle timing and engine stop memorization
• Minimum/maximum cabin temperature
  
• Outdoor temperature maximum threshold
  
• Battery voltage values, engine stop timer, and engine start-up retries
• Diesel engine warm-up time.

Other Features

• Entirely assembled in a new rugged plastic enclosure.
  
• Downloadable via wireless communication data transfer
  
• Battery charge time
• Idle RPM
• Ignition delay, duration and interval
• LED output for quick system status.
• User friendly software included (USB).
• Can be used to turn off headlights.
• No ignition key needed for operation.
• Quick connectors included.
• No external components required.
  

Second Generation Additions:

• Option for Monitoring Dual Batteries
  
• Option for Keyless Operation
• Low and High Temperature Threshold Limits
• Optional Status Indicator
• Optional Override Switch
  
• Wireless Data Acquisition
• Battery Volltage Threshold
  

Inputs / Outputs

• Available inputs
  • 8 Digital inputs (programmable polarity)
  • 2 High impedance analog inputs
  • 1 Starter voltage monitoring input
  • 2 Temperature sensor inputs(1 exterior, 1 passenger compartment)
  • 1 Ignition key bypass input
  • 1 RPM input signal
• Available outputs
  • 4 Main outputs (max. 25A)
  • 2 Positive outputs (max. 2A)
  • 2 Negative outputs (max. 0.2A)
  • 1 PASS LOCK / PASS KEY circuit output
  • 1 Headlamps control output
  • 1 Brake signal output

 Electrical Specifications 

• Operating voltage: 10 to 18V D.C
• Operating temperature: -40 °C (-40 °F) to +75 °C (167 °F)
• Electrical consumption:
  • Before engine stop : 15mA
  • After engine stop : 140mA
  • Without ignition signal : 4mA
• Outputs:
  • 4 relays (N.C.) : 25A
  • 2 positive outputs : 2A
  • 2 negative outputs : 0.22A

Interested? Contact us today.